Air Sand Blaster Gun for removing the burr, rust, scale and paint coating and other surface cleaning and surface treatment work.
☑ Specifica
Materiale corporeo | Aluminum alloy |
|---|---|
Air Pressure | 1.5 Mpa / 217 PSI (15 Bar) |
media Aria Cons. | 1000 L/M |
Port Size | 1/4″ |
Hose Length I.D. | 3/8″ × 3M |
Nozzle Material | 12L15 |
Temp Range | -5 ~ + 60°c (Non frozen) |
☑ Application:
- The removal of car body paint and rust.
- The removal of ship body paint and rust.
- Buildings, wall bricks and wall graffiti removed.
- General iron, stainless steel, industrial products, rust, paint, and polishing.
☑ Caution:
- Always wear gloves, goggles, earmuffs and mask when spraying.
- Connect the steel hose with PVC hose before applying to the body part.
- Connecting to compressor with inlet plug of sand blast gun.
Note: This tool is rated between 3 BAR to 15 BAR . Ensure your compressor is set no less than 3 BAR. - Press the trigger to start blasting sand.
