DP04-P 1/2" Diaphragm Pump /Composite Plastic

복합 플라스틱 펌프, 다이어프램 펌프

DP04-P 1/2″ Diaphragm Pump /Composite Plastic

$0.00

Prowin Tools Company’s air-powered double-diaphragm pumps are highly praised for cost effective in a wide range of special applications. They can delivery sludges and slurries with grit, high viscous liquids, chemicals, cement, etc. The products will not be damaged while idling for a long period of time. They can be safely used in hazardous environments, need no control equipment and cause no electrical danger. The pressure of the outlet of the pumps could be regulated when the machine is running, and there is no need to install any high-cost speed-changeable motor or drive device.

If You Are Searching For diaphragm pumps Manufacturer, Please Feel Free To Contact Us.

제품 번호: DP04-P 카테고리: 복합 플라스틱 펌프, 다이어프램 펌프

설명

Compact, Rugged Design Allows For Easy Mobility, Motor Design Delivers Optimum Air Efficiency, Available In Aluminum, Cast Iron Or Stainless Steel To Withstand Tough Chemical Applications, Bolted Construction For Leak-Free Fluid Handling, Easy Access To Ball Checks And Fluid Caps For Maintenance And Repairs.

☑ 사양

Max Flow Rate	12.66 Gallon / Per Min. ; 48 Liter / Per Min.
평균 에어콘.	400 Liter / Per Min. ; 14.12 Scfm / Per Min.
Lowest Pressure	0.8 Bar (kgf/cm²) ; 11.6 psi
Max Pressure	7 Bar (kgf/cm²) ; 101.5 psi
일의 압박감	1.5 ~ 5 Bar (kgf/cm²) ; 21.75 psi ~ 72.5 psi
Quantity / Cycle	120ml
순중량	3.5 kg
Assemble Size	28(L)cm x 19(W)cm x 28(H)cm
공기 유입구	1/4″ PT (BSP)
Air Outlet	1/4″ PT (BSP)
Liquid Inlet / Outlet	1/2″ PT (BSP)
Inlet Lift (Deep)	6 m-wet ; 3.7 m- dry
Solid Limit	Ø 2 mm