DP06-A 3/4″ Diaphragm Pump /Aluminum Alloy

$0.00

Prowin Tools Company’s air-powered double-diaphragm pumps are highly praised for cost effective in a wide range of special applications. They can delivery sludges and slurries with grit, high viscous liquids, chemicals, cement, etc. The products will not be damaged while idling for a long period of time. They can be safely used in hazardous environments, need no control equipment and cause no electrical danger. The pressure of the outlet of the pumps could be regulated when the machine is running, and there is no need to install any high-cost speed-changeable motor or drive device.

If You Are Searching For diaphragm pumps Manufacturer, Please Feel Free To Contact Us.

제품 번호: DP06-A 카테고리: 알루미늄 합금 펌프, 다이어프램 펌프

설명

Compact, Rugged Design Allows For Easy Mobility, Motor Design Delivers Optimum Air Efficiency, Available In Aluminum, Cast Iron Or Stainless Steel To Withstand Tough Chemical Applications, Bolted Construction For Leak-Free Fluid Handling, Easy Access To Ball Checks And Fluid Caps For Maintenance And Repairs.

☑ 사양

Max Flow Rate	23.74 Gallon / Per Min. ; 90 Liter / Per Min.
평균 에어콘.	540 Liter / Per Min. ; 19.065 Scfm / Per Min.
Lowest Pressure	0.5 Bar (kgf/cm²) ; 7.25 psi
Max Pressure	8.3 Bar (kgf/cm²) ; 120 psi
일의 압박감	1.5 ~ 5 Bar (kgf/cm²) ; 21.75 psi ~ 72.5 psi
Quantity / Cycle	225 ml
순중량	8 kg
Assemble Size	28(L)cm x 23(W)cm x 37(H)cm
공기 유입구	1/4″ PT (BSP)
Air Outlet	3/8″ PT (BSP)
Liquid Inlet / Outlet	3/4″ PT (BSP)
Inlet Lift (Deep)	6 m-wet ; 4.5 m- dry
Solid Limit	Ø 2.4 mm