KH-600P is a H.V.L.P. pressure feed spray gun. The small size spray gun is specifically developed to match workers who need but never compromise on atomization, width of paint pattern & control or comfort. It’s a hand gun for Vehicle, Machine, woodworking and furniture industries etc…..
This matchless performance H.V.L.P. spray gun can save significant expensive paint material (about 30% to compare with conventional spray gun). The H.V.L.P. spray gun have been developed to ensure efficiency of coherence above 65% and less than 10psi air pressure exhaust from air cap to meet the required by environmental protection legislation. H.V.L.P. Spray Gun is extremely environmental friendly.
- Gun Body- is made of aluminum Die-Casting and carefully polished for finest surface. Friendly holding design.
- Fluid Nozzle and Paint Needle- are precisely made of stainless steel with hardened nozzle. That provides finest atomization and perfect finish, 100% strictly hand-checked nozzle set ensures the highest quality for complete spray gun as well as whole range of spare nozzle set. It can be used with water-borne pain materials.
- Air Cap- the special aluminum cap design provides excellent atomization as well.
- Teflon Material Seals & Packing- are resistant from acid, alkali and solvent for ensuring long lifetime. Less maintenance needed.
- With Built- in Air Regulator, Material Flow Regulator, and Round/Oval Pattern Control Device.
Spezifikation | Turn – up Kit | |||||
|---|---|---|---|---|---|---|
Modell Nr | Düsengröße | Fluidausgabe | Musterbreite | Luftverbrauch | Modell Nr | Düsengröße |
KH-600P-08 | 0.8 mm | 130 ml | 300 mm | 280 l/min | SG018-600-08 | 0.8 mm |
KH-600P-11 | 1.1 mm | 140 ml | 310mm | 280 l/min | SG018-600-11 | 1.1 mm |
KH-600P-13 | 1,3mm | 130 ml | 290mm | 280 l/min | SG018-600-13 | 1,3mm |
KH-600P-14 | 1,4mm | 140 ml | 300 mm | 280 l/min | SG018-600-14 | 1,4mm |
KH-600P-18 | 1.8 mm | 160 ml | 310mm | 280 l/min | SG018-600-18 | 1.8 mm |
KH-600P-20 | 2.0 mm | 190 ml | 310mm | 280 l/min | SG018-600-20 | 2.0 mm |
| • Type : Pressure Feed • Cup Capacity : Non • Fluid Inlet : 1/4″ or 3/8″ • Lufteinlass: 1/4″ | • Working Pressure : 20~28 psi • Standard Nozzle : 1.8 mm • Gun Weight : 315 gs |  | ||||
